Our kit is a non-fiberglass, non-asphalt based product which weighs in at 3.5 lbs, for those who are weight conscious, it rejects 97% of the radiant heat, and has a manufacturer's rating of 19db of sound and road noise reduction!!! (please see the notes below on this... )
It is only 3/16" thick, so as not to interfere with proper mounting of your panels and seats, and all holes are pre-cut & all pieces are clearly labeled for your convenience.
It is our #1 goal to provide you ease of install, while making a HUGE improvement in your overall enjoyment of your Corvette!!!
Each kit is hand cut to our specifications, and guaranteed to make a dramatic difference in your C6!

 

Each kit comes with the following pieces:

• Driver & Passenger front floorboard pieces, with holes cut for seat bolts and pedals.
• Driver & Passenger side tunnel pieces, cut around your e-brake.
• Full center console pieces, with holes for the center console bolts.
  
• Full Cargo area floor pieces.
• Full Side rear wheel well pieces.
• Full back wall and corner pieces.
• Full Center Well pre-cut pieces.
• Extra pieces for odds and ends coverage that you may need.

 

Say goodbye to over-heated center consoles, and noisy front cabins!! Our C6 kit is the perfect addition to your C6, and is recommended for every Corvette owner as the #1 modification for their Corvette!!!
Your Corvette will be cooler in the summer, a lot less noisy, and you will regain use of your center console once again.

 

Characteristics | Value | Regulation
Cell Structure: Closed
Nominal Thickness: 5 mm (+ or - 0.5mm)
Steam Permeability: 0.033 gr/m2hkPa ASTM E-96
Noise Insulation: 19dBA IRAM 4063 at 50hz.
Flame Spread Index/Class: 25 or less/ "A" - Class 1 0 ASTM E-84
Smoke Index/Class: 450 or less/ "A" - Class 1 15 ASTM E-84

 

Aluminum Foil
polyethylene backing
closed-cell Polyethylene foam
polyethylene backing
Aluminum Foil